Test

Medion Lifetab MD99000 - 18 Dec 2011 17:25

Tags:

Lsusb

Bus 002 Device 016: ID 0408:b009 Quanta Computer, Inc.

Dmesg

[85627.417647] scsi 17:0:0:0: Direct-Access     Medion   P9514            0000 PQ: 0 ANSI: 2
[85627.479286] sd 17:0:0:0: Attached scsi generic sg2 type 0
[85627.486517] sd 17:0:0:0: [sdb] Attached SCSI removable disk

Mtpfs

You can mount the device in USB by using mtpfs (on ubuntu for ex):

mtpfs /tmp/medion

ADB shell

Even with USB develpoment activated, adb shell does not work, no way to detect the device

Fastboot

Power it on, and press the Volume+ key, you will see a different ID in lsusb:

Bus 002 Device 021: ID 18d1:b00a Google Inc.

You will obtain a menu "Android system recovery <3e>".

Firmware update

By sniffing on the wifi, you will see that the device tries to do a firmware update by getting this file (300MB):

http://cdce.ams002.internap.com/tapntap/medion/MD_LIFETAB_P9514.20111201.245-signed-ota-update-20111201040042.zip

Dmesg

zoobab@buzek /home/zoobab [1]$ ssh admin@192.168.42.167 -p 2222
SSHDroid
Use 'root' on rooted devices otherwise any username works
Default password is 'admin'
admin@192.168.42.167's password: 
/data/data/berserker.android.apps.sshdroid/home $ dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.36.3-00097-g5b55949 (lcadmin@Bryony) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Oct 24 13:33:26 CST 2011
[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: ventana
[    0.000000] Tegra reserved memory:
[    0.000000] LP0:                    1fbed000 - 1fbeefff
[    0.000000] Bootloader framebuffer: 00000000 - ffffffff
[    0.000000] Framebuffer:            2e800000 - 2effffff
[    0.000000] 2nd Framebuffer:         2f000000 - 2fffffff
[    0.000000] Carveout:               30000000 - 3fffffff
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 190464
[    0.000000] free_area_init_node: node 0, pgdat c05b8cc0, node_mem_map c067d000
[    0.000000]   Normal zone: 1280 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 162560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 768 pages used for memmap
[    0.000000]   HighMem zone: 25856 pages, LIFO batch:7
[    0.000000] PERCPU: Embedded 7 pages/cpu @c0e86000 s5920 r8192 d14560 u65536
[    0.000000] pcpu-alloc: s5920 r8192 d14560 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 188416
[    0.000000] Kernel command line: nvmem=128M@384M mem=1024M@0M vmalloc=256M video=tegrafb console=none debug_uartport=lsport usbcore.old_scheme_first=1 lp0_vec=8192@0x1fbed000 tegraboot=sdmmc gpt 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 744MB = 744MB total
[    0.000000] Memory: 745972k/745972k available, 302604k reserved, 106496K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xe8800000 - 0xf8000000   ( 248 MB)                                                                                                                    
[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)                                                                                                                    
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)                                                                                                                    
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)                                                                                                                    
[    0.000000]       .init : 0xc0008000 - 0xc0032000   ( 168 kB)                                                                                                                    
[    0.000000]       .text : 0xc0032000 - 0xc0547000   (5204 kB)                                                                                                                    
[    0.000000]       .data : 0xc056e000 - 0xc05b9780   ( 302 kB)                                                                                                                    
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:448
[    7.696028] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
[    7.965915] pid_max: default: 32768 minimum: 301
[    7.966138] Mount-cache hash table entries: 512
[    7.966545] Initializing cgroup subsys debug
[    7.966560] Initializing cgroup subsys cpuacct
[    7.966576] Initializing cgroup subsys freezer
[    7.966612] CPU: Testing write buffer coherency: ok
[    7.966786] Calibrating local timer... 249.87MHz, setting to 2.50MHz.
[    8.056089] CPU1: Booted secondary processor
[    8.326012] Brought up 2 CPUs
[    8.326025] SMP: Total of 2 processors activated (3997.69 BogoMIPS).
[    8.329670] regulator: core version 0.5
[    8.329822] regulator: dummy: 
[    8.330007] NET: Registered protocol family 16
[    8.330646] host1x bus init
[    8.330938] Tegra SKU: 8 Rev: A04 CPU Process: 1 Core Process: 2 Speedo ID: 1
[    8.330952] Tegra Revision: (null) SKU: 8 CPU Process: 1 Core Process: 2
[    8.331230] tegra2_init_sku_limits: Unknown sku clock avp.sclk
[    8.331244] tegra2_init_sku_limits: Unknown sku clock bsea.sclk
[    8.334501] Initializing Atmel touch driver
[    8.455945] Initializing EETI touch driver
[    8.456498] *** MPU START *** ventana_mpuirq_init...
[    8.456507] *** MPU END *** ventana_mpuirq_init...
[    8.456513] enter ventana_camera_init
[    8.486056] ventana_emc_init: using ventana_siblings_emc_chips
[    8.486073] tegra_init_emc: Memory not recognized, memory scaling disabled
[    8.486082] tegra_init_emc: Memory vid     = 0x0606
[    8.486089] tegra_init_emc: Memory rev_id1 = 0x0000
[    8.486096] tegra_init_emc: Memory rev_id2 = 0x0000
[    8.486102] tegra_init_emc: Memory pid     = 0x5454
[    8.486277] tegra_arb_init: initialized
[    8.486332] tegra_iovmm_register: added iovmm-gart
[    8.491163] bio: create slab <bio-0> at 0
[    8.491797] SCSI subsystem initialized
[    8.491904] tegra-otg tegra-otg: otg transceiver registered
[    8.492013] usbcore: registered new interface driver usbfs
[    8.492080] usbcore: registered new interface driver hub
[    8.492162] usbcore: registered new device driver usb
[    8.497589] tps6586x 4-0034: VERSIONCRC is 2c
[    8.501971] regulator: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby
[    8.503901] regulator: REG-SM_1: 725 <--> 1500 mV at 1000 mV normal standby
[    8.507033] regulator: REG-SM_2: 3000 <--> 4550 mV at 3700 mV normal standby
[    8.508511] regulator: REG-LDO_0: 1500 <--> 3300 mV at 1200 mV normal standby
[    8.511216] regulator: REG-LDO_1: 725 <--> 1500 mV at 1100 mV normal standby
[    8.512697] regulator: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby
[    8.514954] regulator: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV normal standby
[    8.517656] regulator: REG-LDO_4: 1700 <--> 2475 mV at 1800 mV normal standby
[    8.518708] regulator: REG-LDO_5: 1250 <--> 3300 mV at 2850 mV normal standby
[    8.520196] regulator: REG-LDO_6: 1250 <--> 1800 mV at 2850 mV normal standby
[    8.521695] regulator: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV normal standby
[    8.523187] regulator: REG-LDO_8: 1250 <--> 3300 mV at 1800 mV normal standby
[    8.523796] regulator: REG-LDO_9: 1250 <--> 3300 mV at 2850 mV normal standby
[    8.525146] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    8.525448] Bluetooth: Core ver 2.15
[    8.525493] NET: Registered protocol family 31
[    8.525499] Bluetooth: HCI device and connection manager initialized
[    8.525510] Bluetooth: HCI socket layer initialized
[    8.525605] Switching to clocksource timer_us
[    8.526165] tegra-nvmap tegra-nvmap: created carveout iram (256KiB)
[    8.656388] tegra-nvmap tegra-nvmap: created carveout generic-0 (262144KiB)
[    8.657158] NET: Registered protocol family 2
[    8.657261] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    8.657603] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    8.659122] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    8.659953] TCP: Hash tables configured (established 131072 bind 65536)
[    8.659962] TCP reno registered
[    8.659972] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    8.660002] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    8.660157] NET: Registered protocol family 1
[    8.660303] Unpacking initramfs...
[    8.668572] Freeing initrd memory: 148K
[    8.668638] PMU: registered new PMU device of type 0
[    8.692418] highmem bounce pool size: 64 pages
[    8.692558] ashmem: initialized
[    8.693308] fuse init (API version 7.15)
[    8.694097] io scheduler noop registered (default)
[    8.786495] tegra_grhost tegra_grhost: initialized
[    8.786540] host1x: tegradc tegradc
[    9.295721] tegradc tegradc.0: probed
[    9.296107] tegradc tegradc.0: probed
[    9.296238] tegradc tegradc.0: registered overlay
[    9.296250] host1x: tegradc tegradc
[    9.296758] nvhdcp: using "always on" policy.
[    9.296775] tegradc tegradc.1: probed
[    9.297325] tegradc tegradc.1: probed
[    9.297445] tegradc tegradc.1: registered overlay
[    9.297785] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    9.298205] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
[    9.298374] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
[    9.298452] Registered UART port ttyHS1
[    9.298487] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
[    9.298558] Registered UART port ttyHS2
[    9.298602] Initialized tegra uart driver
[    9.300310] loop: module loaded
[    9.300504] i2c i2c-0: mpu3050: +kxtf9
[    9.300513] i2c i2c-0: WARNING: Accel irq not assigned
[    9.300521] i2c i2c-0: mpu3050: +ak8975
[    9.300528] i2c i2c-0: WARNING: Compass irq not assigned
[    9.300536] i2c i2c-0: mpu3050: No Pressure Present
[    9.301005] mldl_cfg:Reset MPU3050
[    9.335716] i2c i2c-0: Installing irq using 396
[    9.335725] i2c i2c-0: Module Param interface = mpuirq
[    9.335864] mpu_init
[    9.338586] nct1008 4-004c: nct1008_probe: initialized
[    9.339009] ================== 3G default enable ===============================================
[    9.339778] PPP generic driver version 2.4.2
[    9.339877] PPP Deflate Compression module registered
[    9.339886] PPP BSD Compression module registered
[    9.340385] PPP MPPE Compression module registered
[    9.340396] NET: Registered protocol family 24
[    9.340776] usbcore: registered new interface driver asix
[    9.340813] usbcore: registered new interface driver cdc_ether
[    9.340848] usbcore: registered new interface driver CDC NCM device
[    9.340882] usbcore: registered new interface driver cdc_subset
[    9.340904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.376810] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
[    9.376879] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
[    9.405662] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000
[    9.425656] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
[    9.425723] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.425735] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.425744] usb usb1: Product: Tegra EHCI Host Controller
[    9.425752] usb usb1: Manufacturer: Linux 2.6.36.3-00097-g5b55949 ehci_hcd
[    9.425760] usb usb1: SerialNumber: tegra-ehci.1
[    9.426047] hub 1-0:1.0: USB hub found
[    9.426065] hub 1-0:1.0: 1 port detected
[    9.426332] usbcore: registered new interface driver cdc_acm
[    9.426340] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.426388] usbcore: registered new interface driver cdc_wdm
[    9.426395] Initializing USB Mass Storage driver...
[    9.426473] usbcore: registered new interface driver usb-storage
[    9.426480] USB Mass Storage support registered.
[    9.426538] usbcore: registered new interface driver libusual
[    9.426631] usbcore: registered new interface driver usbserial
[    9.426639] usbserial: USB Serial Driver core
[    9.426671] USB Serial support registered for GSM modem (1-port)
[    9.426764] usbcore: registered new interface driver option
[    9.426772] option: v0.7.2.2:USB Driver for GSM modems
[    9.426803] USB Serial support registered for pl2303
[    9.426854] usbcore: registered new interface driver pl2303
[    9.426861] pl2303: Prolific PL2303 USB to serial adaptor driver
[    9.426870] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
[    9.432502] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
[    9.437625] android init
[    9.437669] android_probe pdata: c058ef20
[    9.437703] android_bind
[    9.437709] android_bind_config
[    9.437717] Gadget Android: controller 'fsl-tegra-udc' not recognized
[    9.437825] android_usb gadget: android_usb ready
[    9.437833] fsl-tegra-udc: bind to driver android_usb
[    9.437868] f_adb init
[    9.437874] android_register_function adb
[    9.437880] f_mass_storage init
[    9.437920] fsg_probe pdev: c058f698, pdata: c058ff04
[    9.437957] android_register_function usb_mass_storage
[    9.437964] f_mtp init
[    9.437969] android_register_function mtp
[    9.437974] f_rndis init
[    9.438032] android_register_function rndis
[    9.438039] f_accessory init
[    9.438044] android_register_function accessory
[    9.438055] rndis_function_bind_config MAC: 02:3B:3D:66:32:34
[    9.438080] android_usb gadget: using random self ethernet address
[    9.438096] android_usb gadget: using random host ethernet address
[    9.438319] usb0: MAC 2e:1f:a2:48:29:85
[    9.438326] usb0: HOST MAC c2:4c:c6:30:63:30
[    9.438397] acc_bind_config
[    9.438533] mtp_bind_config
[    9.438739] adb_bind_config
[    9.438994] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    9.439005] android_usb gadget: Number of LUNs=1
[    9.439016]  lun0: LUN: removable file: (no medium)
[    9.439383] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
[    9.439535] maXTouch 0-005a: RRC:  i2c_check_functionality = 1
[    9.439675] tegra-i2c tegra-i2c.0: I2c error status 0x00000008
[    9.439685] tegra-i2c tegra-i2c.0: no acknowledge from address 0x5a
[    9.439694] tegra-i2c tegra-i2c.0: Packet status 0x00010009
[    9.440726] maXTouch 0-005a: Failure accessing maXTouch device
[    9.440736] maXTouch 0-005a: Chip could not be identified
[    9.440918] [egalax_i2c]:  Register egalax_i2c cdev, major: 250 
[    9.440942] [egalax_i2c]:  /proc/egalax_dbg created
[    9.440949] [egalax_i2c]:  Driver init done!
[    9.440975] [egalax_i2c]:  Start probe
[    9.441124] input: eGalax_Touch_Screen as /devices/virtual/input/input1
[    9.441189] [egalax_i2c]:  Register input device done
[    9.442389] [egalax_i2c]:  Request irq(366) gpio(174) with result:0
[    9.442398] [egalax_i2c]:  Register early_suspend done
[    9.442404] [egalax_i2c]:  I2C probe done
[    9.442921] using rtc device, tps6586x-rtc, for alarms
[    9.442942] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0
[    9.444155] i2c /dev entries driver
[    9.444654] lirc_dev: IR Remote Control driver registered, major 249 
[    9.444664] IR LIRC bridge handler initialized
[    9.444670] Linux video capture interface: v2.00
[    9.444882] usbcore: registered new interface driver uvcvideo
[    9.444890] USB Video Class driver (v0.1.0)
[    9.444997] trpc_sema_init: registered misc dev 10:49
[    9.445058] trpc_node_register: Adding 'local' to node list
[    9.445271] trpc_node_register: Adding 'avp-remote' to node list
[    9.445398] tegra_avp_probe: driver registered, kernel 30100000(e8a00000), msg area 27088000/27088110
[    9.445535] tegra_camera: probe
[    9.462802] yuv sensor_init
[    9.462829] yuv sensor_probe
[    9.462923] yuv sensor_init
[    9.462954] yuv sensor_probe
[    9.495153] bq27541-battery 2-0055: driver registered
[    9.495372] device-mapper: uevent: version 1.0.3
[    9.495555] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    9.495594] Bluetooth: HCI UART driver ver 2.2
[    9.495602] Bluetooth: HCI H4 protocol initialized
[    9.495609] Bluetooth: HCILL protocol initialized
[    9.495615] Bluetooth: BlueSleep Mode Driver Ver 1.1
[    9.496007] cpuidle: using governor ladder
[    9.496174] cpuidle: using governor menu
[    9.496208] sdhci: Secure Digital Host Controller Interface driver
[    9.496216] sdhci: Copyright(c) Pierre Ossman
[    9.496286] mmc0: Invalid maximum block size, assuming 512 bytes
[    9.501802] mmc0: SDHCI controller on tegra [sdhci-tegra.3] using ADMA
[    9.501814] sdhci3: initialized irq 63 ioaddr fe600600
[    9.501868] mmc1: Invalid maximum block size, assuming 512 bytes
[    9.501889] mmc1: no vmmc regulator found
[    9.501980] mmc1: SDHCI controller on tegra [sdhci-tegra.2] using ADMA
[    9.502042] sdhci2: initialized irq 51 ioaddr fe600400
[    9.502079] mmc2: Invalid maximum block size, assuming 512 bytes
[    9.502098] mmc2: no vmmc regulator found
[    9.502209] mmc2: SDHCI controller on tegra [sdhci-tegra.0] using ADMA
[    9.502220] sdhci0: initialized irq 46 ioaddr fe600000
[    9.502846] tegra-aes tegra-aes: registered
[    9.503088] usbcore: registered new interface driver usbhid
[    9.503096] usbhid: USB HID core driver
[    9.503333] logger: created 64K log 'log_main'
[    9.503400] logger: created 256K log 'log_events'
[    9.503462] logger: created 64K log 'log_radio'
[    9.503524] logger: created 64K log 'log_system'
[    9.503589] isl29018 0-0044: Couldn't get regulator vdd_vcore_phtn
[    9.506115] WM8903 0-001a: WM8903 revision 2
[    9.594799] mmc0: new high speed MMC card at address 0001
[    9.595004] mmcblk0: mmc0:0001 HYNIX  29.5 GiB 
[    9.600930] Primary GPT is invalid, using alternate GPT.
[    9.600962]  mmcblk0: p1 (体S) p2 (乌X) p3 (䙍G) p4 (偁P) p5 (䅃C) p6 (卍C) p7 (单P) p8 (䑕A)
[    9.745704] usb 1-1: new full speed USB device using tegra-ehci and address 2
[    9.782695] usb 1-1: not running at top speed; connect to a high speed hub
[    9.791950] usb 1-1: New USB device found, idVendor=12d1, idProduct=1404
[    9.791962] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    9.791971] usb 1-1: Product: HUAWEI MOBILE WCDMA EM770W
[    9.791978] usb 1-1: Manufacturer: HUAWEI Technology
[    9.827391] android_usb gadget: high speed config #1: android
[    9.859040] fxz-option_probe: [(null)]
[    9.859048] fxz-option_probe: !hw_udev
[    9.859058] option 1-1:1.0: GSM modem (1-port) converter detected
[    9.859289] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[    9.859694] fxz-option_probe: [e7998800]
[    9.859704] option 1-1:1.1: GSM modem (1-port) converter detected
[    9.859859] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[    9.860218] fxz-option_probe: [e7998800]
[    9.860228] option 1-1:1.2: GSM modem (1-port) converter detected
[    9.860395] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[    9.860751] fxz-option_probe: [e7998800]
[    9.860761] option 1-1:1.3: GSM modem (1-port) converter detected
[    9.860918] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[    9.861266] fxz-option_probe: [e7998800]
[    9.861276] option 1-1:1.4: GSM modem (1-port) converter detected
[    9.861438] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
[    9.861789] fxz-option_probe: [e7998800]
[    9.861799] option 1-1:1.5: GSM modem (1-port) converter detected
[    9.862016] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB5
[    9.862314] usb 1-1: USB disconnect, address 2
[    9.862485] option: option_instat_callback: error -108
[    9.862576] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[    9.862618] option 1-1:1.0: device disconnected
[    9.862810] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[    9.862847] option 1-1:1.1: device disconnected
[    9.863034] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[    9.863071] option 1-1:1.2: device disconnected
[    9.863257] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[    9.863295] option 1-1:1.3: device disconnected
[    9.863479] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[    9.863517] option 1-1:1.4: device disconnected
[    9.863718] option: option_instat_callback: error -108
[    9.863803] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5
[    9.863840] option 1-1:1.5: device disconnected
[   10.056931] mmc1: new high speed SDHC card at address b368
[   10.057152] mmcblk1: mmc1:b368 uSD   30.1 GiB 
[   10.063024]  mmcblk1: p1
[   10.145492] tegra_i2s_driver_probe
[   10.145555] tegra_i2s_driver_probe
[   10.145583] i2s_set_channel_bit_count: enabling non-symmetric mode
[   10.145689] tegra_spdif_driver_probe
[   10.146200] asoc: WM8903 <-> tegra-i2s-1 mapping ok
[   10.146429] asoc: tegra_generic_voice_codec <-> tegra-i2s-2 mapping ok
[   10.146667] asoc: tegra_generic_spdif_codec <-> tegra-spdif mapping ok
[   10.565748] usb 1-1: new high speed USB device using tegra-ehci and address 3
[   10.636075] usb 1-1: New USB device found, idVendor=12d1, idProduct=1404
[   10.636087] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[   10.636097] usb 1-1: Product: HUAWEI MOBILE WCDMA EM770W
[   10.636106] usb 1-1: Manufacturer: HUAWEI Technology
[   10.638622] fxz-option_probe: [(null)]
[   10.638630] fxz-option_probe: !hw_udev
[   10.638640] option 1-1:1.0: GSM modem (1-port) converter detected
[   10.638849] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   10.645800] fxz-option_probe: [e70f0c00]
[   10.645811] option 1-1:1.1: GSM modem (1-port) converter detected
[   10.645973] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   10.646348] fxz-option_probe: [e70f0c00]
[   10.646359] option 1-1:1.2: GSM modem (1-port) converter detected
[   10.646525] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   10.646909] fxz-option_probe: [e70f0c00]
[   10.646919] option 1-1:1.3: GSM modem (1-port) converter detected
[   10.647085] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[   10.647486] fxz-option_probe: [e70f0c00]
[   10.647497] option 1-1:1.4: GSM modem (1-port) converter detected
[   10.647672] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
[   10.648087] fxz-option_probe: [e70f0c00]
[   10.648098] option 1-1:1.5: GSM modem (1-port) converter detected
[   10.648335] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB5
[   11.346525] Audio:enable digital mic
[   11.546135] input: tegra Wired Accessory Jack as /devices/platform/soc-audio/sound/card0/input2
[   11.547123] ALSA device list:
[   11.547133]   #0: tegra (WM8903)
[   11.547210] GACT probability NOT on
[   11.547223] Mirror/redirect action on
[   11.547233] u32 classifier
[   11.547239]     Actions configured
[   11.547248] Netfilter messages via NETLINK v0.30.
[   11.547303] nf_conntrack version 0.5.0 (11658 buckets, 46632 max)
[   11.547608] ctnetlink v0.93: registering with nfnetlink.
[   11.547732] xt_time: kernel timezone is -0000
[   11.547923] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.548017] arp_tables: (C) 2002 David S. Miller
[   11.548063] TCP cubic registered
[   11.548281] NET: Registered protocol family 10
[   11.548779] lo: Disabled Privacy Extensions
[   11.549150] Mobile IPv6
[   11.549160] IPv6 over IPv4 tunneling driver
[   11.549485] sit0: Disabled Privacy Extensions
[   11.549833] ip6tnl0: Disabled Privacy Extensions
[   11.549911] NET: Registered protocol family 17
[   11.549944] NET: Registered protocol family 15
[   11.550061] Bluetooth: L2CAP ver 2.15
[   11.550069] Bluetooth: L2CAP socket layer initialized
[   11.550085] Bluetooth: SCO (Voice Link) ver 0.6
[   11.550092] Bluetooth: SCO socket layer initialized
[   11.550169] Bluetooth: RFCOMM TTY layer initialized
[   11.550191] Bluetooth: RFCOMM socket layer initialized
[   11.550200] Bluetooth: RFCOMM ver 1.11
[   11.550208] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.550218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   11.558580] Disabling clock audio left on by bootloader
[   11.558592] Disabling clock stat_mon left on by bootloader
[   11.558623] Disabling clock fuse_burn left on by bootloader
[   11.558636] Disabling clock clk_d left on by bootloader
[   11.558649] Disabling clock pll_c_out1 left on by bootloader
[   11.558658] Disabling clock pll_c left on by bootloader
[   11.558838] Tegra protected aperture disabled because nvmap is using system memory
[   11.560527] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[   11.563840] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2011-12-18 20:13:41 UTC (1324239221)
[   11.563856] QCI System Management Init.
[   12.746089] option: option_instat_callback: error -2
[   12.746317] option: option_instat_callback: error -2
[   15.436024] Warning: unable to open an initial console.
[   15.436133] Freeing init memory: 168K
[   15.442247] init: /init.ventana.rc: 188: invalid command 'umount'
[   15.608273] init: could not open /dev/keychord
[   15.687780] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[   15.739774] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[   15.791133] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[   15.800313] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended
[   15.805834] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[   15.840089] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[   16.034782] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[   16.065863] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[   16.067599] init: cannot find '/system/bin/osproxy.sh', disabling 'osproxy'
[   16.190822] warning: `adbd' uses 32-bit capabilities (legacy support in use)
[   16.190898] enabling adb
[   16.209297] adb_open(adbd)
[   16.346787] adb_release
[   16.346839] adb_open(adbd)
[   16.604950] android_usb gadget: high speed config #1: android
[   17.849115] set mic unMute enable: 0
[   17.850419] set mic unMute enable: 0
[   17.852064] set mic unMute enable: 0
[   17.853365] set mic unMute enable: 0
[   18.897068] Audio:enable digital mic
[   19.097246] avp_init: read firmware from 'nvrm_avp.bin' (33792 bytes)
[   19.185721] avp_node_try_connect: can't connect to 'RPC_AVP_PORT'
[   19.185783] avp_svc_thread: got remote peer
[   19.186937] [AVP]: AVP kernel (Aug 11 2011 04:51:46)
[   19.215683] avp_init: avp init done
[   19.371112] avp_lib: Successfully loaded library nvmm_manager.axf (lib_id=1152f8)
[   19.725933] option: option_instat_callback: error -2
[   19.728291] option: option_instat_callback: error -2
[   27.625881] avp_lib: Successfully unloaded 'nvmm_manager.axf'
[   27.626283] avp_svc_thread: couldn't receive msg
[   27.626294] avp_svc_thread: done
[   27.626372] avp_uninit: avp teardown done
[   34.381932] wifi_set_power = 1
[   34.602424] wifi_set_carddetect = 1
[   34.603268] 
[   34.603271] Dongle Host Driver, version 4.218.248.23
[   34.834050] init: cannot find '/system/bin/osproxy.sh', disabling 'osproxy'
[   34.835809] request_suspend_state: wakeup (3->0) at 27130152458 (2011-12-18 20:14:04.767057546 UTC)
[   34.849047] mmc2: new high speed SDIO card at address 0001
[   34.854381] DHD: dongle ram size is set to 294912(orig 294912)
[   34.989845] Firmware version = wl0: Feb 11 2011 17:01:05 version 4.218.248.23
[   35.123244] wlan0: Broadcom Dongle Host Driver mac=74:2f:68:ba:d8:d8
[   35.469558] wl_iw_set_cscan Ignoring CSCAN : First Scan is not done yet 1
[   35.770215] STA connect received 1
[   36.058215] wl_iw_set_country: set country for BE as BE rev -1 is OK
[   39.143523] mtp_open
[   46.075688] wlan0: no IPv6 routers present
[  144.962387] init: untracked pid 1038 exited
[  202.286164] init: no such service 'dhcpcd_:-h android_303d81e70d2958fd '
[  202.367230] wifi_set_power = 0
[  202.625359] wifi_set_carddetect = 0
[  202.816012] mmc2: card 0001 removed
[  203.702802] wifi_set_power = 1
[  203.995191] wifi_set_carddetect = 1
[  203.998741] 
[  203.998745] Dongle Host Driver, version 4.218.248.23
[  204.237855] mmc2: new high speed SDIO card at address 0001
[  204.241116] DHD: dongle ram size is set to 294912(orig 294912)
[  204.367551] Firmware version = wl0: Feb 11 2011 17:01:05 version 4.218.248.23
[  204.491739] wlan0: Broadcom Dongle Host Driver mac=74:2f:68:ba:d8:d8
[  204.918342] wl_iw_set_country: set country for BE as BE rev -1 is OK
[  204.919866] wl_iw_set_cscan Ignoring CSCAN : First Scan is not done yet 1
[  204.921467] wl_iw_set_cscan Ignoring CSCAN : First Scan is not done yet 2
[  205.139980] STA connect received 1
[  215.135663] wlan0: no IPv6 routers present
[  395.048616] wl_iw_set_suspend: Suspend Flag 0 -> 1
[  517.129264] wl_iw_set_suspend: Suspend Flag 1 -> 0
[  517.132798] wl_iw_set_suspend: Suspend Flag 0 -> 1
[  517.140728] wl_iw_set_suspend: Suspend Flag 1 -> 0
[  564.669944] init: untracked pid 7880 exited
[  582.869539] wl_iw_set_suspend: Suspend Flag 0 -> 1
[ 1061.675903] option: option_instat_callback: error -2
[ 1061.676537] option: option_instat_callback: error -2
/data/data/berserker.android.apps.sshdroid/home $

Links

XBMC on the Acer EL1200 - 18 Dec 2011 17:18

Tags:

Two years ago, I bought for 200EUR (VAT incl.) an Acer EL1200 desktop (1GB RAM, 160GB disk) with a 15 LCD screen, a keyboard and a mouse. While I mainly use my laptop to work, I used this box once upon a time, notably to flash hundreds of USB keys for the OLPC project.

Now, I have decided to use this box as a media center and home server, I have upgraded it with a 1TB harddisk, and tried XBMC live on it. I have tried to install XBMC on it, but I hit an error with grub refusing to install on the disk. - Comments: 0

Brussels Airlines Is Loosing Customers With A Buggy Website - 22 Dec 2008 12:20

Tags:

I was trying to book a flight with the Brussels Airlines website, but unfortunately, they do not use standards of the web, so they are loosing customers:

For example, flash apparently is creating an overlay layer where you cannot choose the day you want to travel:

flysn2.png

When I tried to find out where to complain about this bug on their website, I did not found any email address to write to. They had a webform to send an email, but no functionality to attach a picture. So I sent an email to moc.senilriaslessurb|ofni#moc.senilriaslessurb|ofni and moc.senilriaslessurb|retsambew#moc.senilriaslessurb|retsambew. Let's see how long they take to solve the bug.

Furthermore, their frontpage does not seem to be very W3C compliant (120 Errors, 47 warning(s)). - Comments: 0

EPO

Rijswijk, 2 December 2005
Noe to all staff in The Hague
Subject: Draft petition addressed to the Commissioner of Taxation of the European Corimission
The Office has been informed that a draft petition addressed to Mr Lasz16 Kovacs, Commissioner for Taxation of the European Commission is currently circulating among certain members of the staff in The Hague. This draft petition requests the Commissioner to investigate the policy proposals of the Netherlands Government and to intervene in the Administrative Council in this respect.
The attention of the staff is drawn to the fact that such a petition, which aims to interfere in the process of negotiation between the Dutch Authorities and the European Patent Office, is contrary to the interest of the Office and is thus in breach of the provisions of Article 14(1) of the Service Regulations.

Christian Archambeau
Principal Director Administration